71 documents
Eddy current sensors 10
CZ9910 High-Temperature Digital Eddy Current Sensor
Digital eddy current sensor specifications, probe options and conditioner range differences.
CZ9920 High-Accuracy Digital Eddy Current Sensor
Digital eddy current sensor specifications, probe options and conditioner range differences.
CZ9930 Eddy Current Displacement and Temperature Sensor
Combined displacement and temperature outputs, ordering codes and unresolved temperature-drift channel assignment.
YD9800 Eddy Current Displacement Sensor
Probe and conditioner selection, measurement ranges and environmental specifications.
YD9810 Shaft Vibration Transmitter
Shaft vibration transmitter specifications and probe ordering options.
YD9820 Two-Wire Shaft Vibration Transmitter
Two-wire shaft vibration transmitter electrical specifications and selection codes.
YDYT9810 Integrated Eddy Current Displacement Sensor
Probe ranges, dimensions and ordering options for the integrated displacement sensor.
YD9800 eddy-current displacement sensor
Probe and driver selection, matched cable lengths, target calibration and source-stated installation constraints.
YD9810 shaft vibration transmitter
Probe positioning, cable and grounding rules, output calibration and systematic fault checks.
YDYT9800 integrated eddy-current sensor
Integrated probe/driver ranges, output choices, target preparation, gap setting and recalibration.
Portable instruments 19
CZ800 Portable Vibration Analyzer
Portable vibration acquisition, measurement channels and tablet hardware specifications.
CZ800D Field Balancing Instrument
Field balancing, vibration acquisition and tablet hardware specifications.
CZ9500A Portable Vibration Meter
True-RMS and equivalent-peak vibration measurement with integrated or external sensor variants.
YD66 Portable Wireless Inspection Instrument
Wireless vibration, non-contact temperature and reflective laser speed measurement for machinery inspection.
CZ800 / CZ800D portable analysis and field balancing
Hardware, acquisition specifications, software functions and supplied equipment described in the joint product introduction.
CZ800: Capabilities and reading map
An overview of the CZ800 software workflow, guide chapters, data requirements and recorded capability boundaries.
CZ800: First use and complete workflows
Prepare the software, perform a first measurement and verify capture, diagnosis, inspection and balancing workflows.
CZ800: Equipment and measurement points
Create and maintain the equipment hierarchy, measurement points, thresholds and configuration imports and exports.
CZ800: Connection and acquisition parameters
Connect an acquisition card and understand sampling modes, sensor settings, parameter delivery and speed-dependent analysis.
CZ800: Acquisition and historical records
Run single, continuous or timed acquisition, understand stopping and complete-segment saving, and inspect historical records.
CZ800: Analysis views and chart controls
Use waveform, spectrum, envelope, cepstrum, trend and waterfall views, with the recorded boundaries of Bode and shaft-orbit displays.
CZ800: Bearing fault diagnosis
Select a bearing and measured record, match characteristic frequencies, recalculate spectra and save a human-reviewed diagnosis.
CZ800: Field balancing
Follow single-plane and two-plane balancing stages, select valid measurement sources, enter phase and interpret residual verification.
CZ800: Inspection routes and execution
Create route plans, capture each execution point, record skipped or abnormal points and complete a reportable inspection.
CZ800: Reports and data export
Generate capture, inspection and balancing reports, and export raw waveforms, spectra, analysis summaries and charts.
CZ800: Settings, licensing and backup recovery
Save acquisition defaults, manage feature authorization, create backups and apply or cancel a restoration on restart.
CZ800: AI assistant and knowledge base
Choose knowledge or software mode, prepare semantic search, understand data sent to the cloud and use the recorded AI tools.
CZ800: Practical scenarios and troubleshooting
Apply CZ800 to routine checks, abnormal vibration, inspection, balancing and data handoff, with a focused troubleshooting table.
CZ800: Capability checklist and limitations
Review the recorded function coverage, verify complete workflows and distinguish available functions from unimplemented or unconfirmed capabilities.
Monitoring systems & acquisition 7
CZ900 Online Fault Diagnosis and Monitoring System
Catalog architecture, monitoring features and analysis scope for the CZ900 system used with YD510 acquisition hardware.
YD285 Integrated Intelligent Vibration Sensor
Piezoelectric acceleration measurement with onboard DSP, FFT and RS-485 networking.
YD290 Envelope and Velocity Dual-Output Transmitter
Dual 4–20 mA output specifications and separate vibration-velocity and envelope range selection.
YD510 Data Acquisition Card
Acquisition channels, supported sensors, industrial interfaces, wireless communication and installation specifications.
CZ900 online condition-monitoring system
July 2024 system architecture, source-specific sensor and acquisition specifications, configuration, analysis and export workflows.
VibMonitor monitoring-system user manual
The June 2021 software workflow for instrument configuration, asset hierarchy, alarms, trends, vibration analysis and administration.
YD510 acquisition unit setup and troubleshooting
Hardware interfaces, network and channel configuration, acquisition constraints, waveform inspection and fault handling.
Vibration transmitters 14
CZ9300 Explosion-Protected Integrated Vibration Transmitter
Acceleration, velocity and displacement options with electrical, mechanical and ordering specifications.
CZ9300XL Explosion-Protected Dual-Output Vibration Transmitter
Velocity current output and dynamic acceleration output, with documented ordering ambiguities.
CZ9400 Flameproof Integrated Vibration Transmitter
Acceleration, velocity and displacement options with electrical, mechanical and ordering specifications.
CZ9600 Digital-Display Vibration Transmitter
Acceleration, velocity and displacement options with electrical, mechanical and ordering specifications.
GZW50-150 Intrinsically Safe Mining Vibration and Temperature Transmitter
GZW50/150 catalog ratings and ordering codes for separate vibration and temperature outputs.
YD280 Digital Vibration Transmitter
RS-485 vibration measurement, networking, optional relay output and configuration codes.
YD9230 Integrated Vibration and Temperature Transmitter
Separate vibration and temperature outputs with range, connection and insertion-depth ordering options.
YD9700MS Three-Axis Vibration Transmitter
MEMS vibration measurement on X, Y and Z axes, with mounting and cable-exit options.
CZ9300 integrated vibration transmitter
Measurement options, electrical and environmental specifications, and ordering fields for CZ9300.
CZ9400 vibration transmitter
CZ9400 measurement ranges, environmental limits and configuration fields.
CZ9600 digital-display vibration transmitter
CZ9600 measurement functions, specifications and ordering options.
GZW50/150 vibration and temperature sensor
Independent vibration and temperature outputs, limits and ordering configuration for the mining sensor.
YD9230 vibration and temperature transmitter
Two independent current outputs, vibration response and temperature-probe ordering options.
YD9700MS three-axis vibration transmitter
Three-axis vibration measurement, stated ranges and ordering fields with the source's sensing-principle conflict preserved.
Wireless sensors 4
YD260 Wireless Vibration and Temperature Sensor / YD260WG Gateway
Separate sensor and gateway specifications, transmission settings and catalog limitations.
YD260 wireless sensor setup and operation
V1.50 instructions for the wireless sensor, receiver, monitoring software, sensor groups, history and alarms.
YD360 wireless sensor: three-page source
The distinct MEMS/LoRa YD360 source, including measurement spans, upload intervals and installation options.
YD360 wireless monitoring: fifteen-page source
Piezoelectric/Zigbee hardware description and the v1.2.0 monitoring-software workflow, including FFT and logs.
Velocity & acceleration sensors 6
YD30 Accelerometer / YD30W Acceleration and Temperature Sensor
Separate catalog specifications for YD30 and YD30W, including known YD30 differences across manuals.
YD33 Vibration Velocity Sensor / YD37 Three-Axis Accelerometer
Separate velocity and three-axis acceleration sensor measurement, excitation and mounting specifications.
YD30W acceleration and temperature sensor
Piezoelectric vibration measurement, PT100 temperature measurement and configuration options.
YD30 accelerometer: independent manual
The independent YD30 source covering its stated capacitive principle, specifications, mounting and gravity calibration example.
YD33 piezoelectric velocity sensor
Velocity sensing, constant-current requirements and mechanical configuration options.
YD37 triaxial accelerometer
Three-axis IEPE measurement, electrical limits, mounting and supplied cable.
Speed sensors 6
YD240 Speed Transmitter
Speed-signal input, current or RS-485 output and pulses-per-revolution selection.
YD60 Magnetoelectric Speed Sensor
Passive magnetoelectric speed signal specifications and threaded-housing ordering options.
YD62 Explosion-Protected Speed Sensor
Speed sensing electrical specifications, detection distances and mechanical ordering options.
YD69 Forward and Reverse Rotation Speed Sensor
Speed sensing electrical specifications, detection distances and mechanical ordering options.
YD240 rotational-speed transmitter
Input requirements, terminals, DIN-rail installation context and ordering examples.
YD62 speed sensor installation and operation
Magnetoresistive speed sensing, wiring, target setup, basic checks and source-stated intrinsic-safety parameters.
Monitoring instruments 1
Monitoring Instrument Series
YD430, YD420, YD440 and YD470 sensor inputs, outputs and series enclosure dimensions.
Calibration equipment 3
YD-10 Speed Calibrator
Portable speed calibration, sensor signal input, adjustable excitation and pulse-output specifications.
YD-12 Automatic Vibration Calibrator
Vibration-shaker ranges, touchscreen acquisition hardware and calibration data output.
YD-20 Static Displacement Calibrator
Portable static calibration for eddy current displacement sensors, with target-disc and probe pairings.
Fault simulation 1
Fault Simulation Test Bench
Modular bearing and gear fault experiments, balancing exercises and the complete catalog equipment list.