Product manual
CZ9300 integrated vibration transmitter
Measurement options, electrical and environmental specifications, and ordering fields for CZ9300.
On this page
Measurement principle and output
CZ9300 combines a piezoelectric sensing element with measurement, conversion, integration, amplification and transmission circuits. Built-in integration provides a velocity measurement from the acceleration signal. The selected measurement is transmitted as a two-wire 4–20 mA output. The source describes wiring error protection.
Select velocity, acceleration or displacement when ordering; these are measurement options, not three simultaneous output channels. The stated positive direction runs from the mounting base into the sensor body.
Technical specifications
| Parameter | Value |
|---|---|
| Maximum selectable velocity range | 0–100 mm/s |
| Maximum selectable acceleration range | 0–50 g |
| Maximum selectable displacement range | 0–8000 µm |
| Acceleration frequency response | 2–2000 Hz |
| Velocity frequency response | 5–1000 Hz |
| Displacement frequency response | 10–2000 Hz |
| Output | Two-wire 4–20 mA |
| Supply | +24 V DC |
| Accuracy | ±5% |
| Ambient temperature | −40 to +85 °C |
| Maximum shock | 2000 g |
| Piezoelectric material | PZT-5 |
| Protection | IP67 |
| Housing | Stainless steel |
| Weight | Approximately 110 g |
| Explosion-protection marking stated | EXia IIC T4 Ga |
The explosion-protection text is the marking stated in this source; the source does not supply a current certificate verification.
Ordering configuration
The ordering structure is CZ9300-A-B-C-D-E.
| Field | Listed options |
|---|---|
| A: measurement | 01 = velocity (V); 02 = acceleration (G); 03 = displacement (D) |
| B: range | Velocity examples 01/02/03 = 0–10/20/30 mm/s; acceleration 01/02/03 = 0–10/20/30 g; displacement 01/02/03 = 0–100/200/300 µm |
| C: mounting | 01 = M10 × 1.5; 02 = M5 × 0.8; 03 = M8 × 1.25; 04 = 1/4–28; 05 = magnetic base; 06 = custom |
| D: cable | 01 = 1 m; 02 = 2 m; 03 = 3 m, with further lengths indicated |
| E: lead arrangement | 00 = direct cable; K identifies armored cable; 01 = circular connector |
The source example A01-B02-C01-D02-E00 specifies velocity, 0–20 mm/s, M10 × 1.5 mounting, a 2 m cable and direct leads. Obtain the configuration-specific dimensional and connection drawing when finalizing the installation; the source's plotted curves and drawing geometry are not reproduced here.