Product reference
YD9700MS Three-Axis Vibration Transmitter
MEMS vibration measurement on X, Y and Z axes, with mounting and cable-exit options.
On this page
Technical specifications
| Parameter | Specification |
|---|---|
| Measurement types | Vibration acceleration, velocity or displacement |
| Output | 4–20 mA through a five-pin circular connector |
| Acceleration frequency response | 2–2000 Hz |
| Velocity frequency response | 5–1000 Hz |
| Displacement frequency response | 10–2000 Hz |
| Measurement error | ≤ ±5% FSO |
| Axes | X, Y and Z |
| Operating temperature | −40 to +85°C |
| Supply | +12 to +24 VDC |
| Maximum shock | 2000 g |
| Sensor type | MEMS |
| Protection | IP68 |
| Housing | 304 stainless steel |
Ordering options
YD9700MS-A□□-B□□-C□□-D□□-E□□
| Parameter | Specification |
|---|---|
| A — Measurement type | 01: V (velocity); 02: G (acceleration); 03: D (displacement) |
| B — Vibration range | V: 01 = 0–10 mm/s; 02 = 0–20 mm/s; 03 = 0–30 mm/s; …; G: 01 = 0–10 g; 02 = 0–20 g; 03 = 0–30 g; …; D: 01 = 0–100 μm; 02 = 0–200 μm; 03 = 0–300 μm; … |
| C — Mounting | 01: M10×1.5; 02: M8×1.25; 03: magnetic base; 04: custom |
| D — Cable exit | 01: top; 02: side |
| E — Cable length | 01: 1 m; 02: 2 m; 03: 3 m; … |
Only explicitly printed codes are listed. Ellipses do not confirm the omitted intermediate codes.
Dimension drawing labels
5/8-24UNEF circular connector; overall height 38.60; lower height 22.50; width 30.00; mounting thread M6×1.
These are the legible labels in the catalog drawing. The bare numbers do not each carry a unit. Their dimension datums and applicability to the selected configuration require confirmation; do not apply one illustrated geometry to every ordering option.
Mounting-thread difference
The ordering table lists M10×1.5 and M8×1.25, while the dimension drawing marks M6×1. Their configuration relationship is unconfirmed. Confirm the exact supplied mounting thread and mounting geometry before ordering or installation.