Product reference
YD510 Data Acquisition Card
Acquisition channels, supported sensors, industrial interfaces, wireless communication and installation specifications.
On this page
Acquisition hardware
| Parameter | Specification |
|---|---|
| Resolution, listed as accuracy | 24 bit |
| Sampling rate | 102.4 kHz |
| Channels | 4 / 8 / 12 |
| Supported sensor | IEPE constant-current accelerometer |
| Supported sensor | Eddy current displacement sensor |
| Supported sensor | Speed sensor |
Communication interfaces
| Parameter | Specification |
|---|---|
| RS-485 ports | 2 |
| RS-485 isolation | 2500 V |
| RS-485 protocol | Modbus RTU |
| Ethernet connector | RJ-45 |
| Ethernet standard | 100Base-TX |
| 4G connector | SMA female |
| 4G modes, characters as printed | LTE-FDDILTE-TDDIWCDMA\TD-SCDMAlCDMA\GSM; described as all-network support |
| Peak RF output | 33 dbm maximum GSM peak, as printed |
| Bluetooth connector | SMA female, shared with Wi-Fi |
| Bluetooth frequency | 2.400–2.4835 GHz |
| Bluetooth standard | 4.2 |
Mechanical, supply and environmental specifications
| Parameter | Specification |
|---|---|
| Housing material | Galvanized steel plate + PC; the additional material descriptor is unclear |
| Dimensions | 159 × 120 × 57 mm |
| Weight | 500 g |
| Mounting | DIN35 rail |
| Supply | 8–36 VDC |
| Power | < 15 W |
| Operating temperature | −40 to +70°C |
Catalog wording limitations
The separators and characters in the 4G network-mode string are ambiguous. The material wording after PC is also unclear. Confirm the supported network modes and exact housing material for the ordered device; this reference does not silently substitute a different material or network specification.