Product manual
CZ9600 digital-display vibration transmitter
CZ9600 measurement functions, specifications and ordering options.
On this page
The narrative specifies a dot-matrix LCD, while the size entry says LED display. The display type remains unresolved. Temperature drift is printed as ≤0.1%°C, without a division sign. The filename timestamp does not establish a formal product version.
Monitoring functions
CZ9600 monitors vibration on rotating machinery including turbines, fans, compressors, motors, pumps and gearboxes. The source describes measurement of vibration changes associated with imbalance, misalignment, looseness, bearing damage and gear damage; these measurements do not themselves establish a fault diagnosis.
The transmitter provides a local digital display and a 4–20 mA analog output. The narrative describes velocity RMS and displacement peak-to-peak conversion, automatic error correction and return-to-zero settings. Acceleration is also included in the specification and selection tables.
Technical specifications
| Parameter | Value |
|---|---|
| Frequency response, velocity | 5–1000 Hz |
| Frequency response, displacement | 10–1000 Hz |
| Frequency response, acceleration | 2–2000 Hz |
| Range limits stated | 0–90 g; 0–200 mm/s; 0–900 µm |
| Supply | +24 V DC |
| Load resistance | At most 500 Ω |
| Output | 4–20 mA |
| Accuracy | ±3% |
| Resolution | 0.05% |
| Operating temperature | −40 to +85 °C |
| Protection | IP62 |
| Overload current | At most 50 mA; overheating or short-circuit protection stated |
| Weight | Approximately 450 g |
| Housing | Stainless steel; other materials by request |
| Overall size stated | 84 × 65 mm |
Temperature drift is given as ≤0.1%°C in the source; its intended unit requires confirmation.
Ordering fields
The code structure is CZ9600-A-B-C-D. A01 is velocity, A02 acceleration and A03 displacement.
The range examples under B run from 01 = 0–10 to 09 = 0–90 for velocity in mm/s and acceleration in g, and from 01 = 0–100 to 09 = 0–900 for displacement in µm. The technical table separately states a velocity maximum of 200 mm/s; the source does not give a corresponding ordering code.
Mounting options C01–C06 are M10 × 1.5, M5 × 0.8, M8 × 1.25, a thread printed as M1/4–28, magnetic base and custom manufacture. Cable examples include D01 = 1 m, D02 = 2 m and a printed D03 = 10 m. Confirm the thread designation and required cable code for the actual order.
The source contains a housing drawing. Use an approved configuration-specific drawing to set clearance and mounting geometry.